Some great features of this product include:
- Festool FastFix chuck system allows you to use any of the five Festool specialty chucks with your drill. Chucks can be swapped quickly and easily
- Brushless motor for higher efficiency, higher torque, longer runtimes, better reliability and long service life.
- 2.6 Ah Lithium Ion batteries provide low weight with high energy density for long run times with less strain.
- Electronically controlled motor and clutch with fewer wearing parts and motor and battery protection for longer run time and service life.
- Independent drill and drive modes with a flick of a switch lets you preserve your favorite clutch setting between drilling and driving tasks.
From the tool manufacturer who pays attention to the details, Festool introduces their new Lithium-Ion drill / drivers. Certainly they are not the first to market with Lithium-Ion technology, but they have done it right. Not only do you get the benefits of the lighter weight of the Lithium-Ion batteries coupled with more power and longer run times, but they have gone the extra step to include an indicator system that beeps when the battery is getting low, when the drill is getting overloaded, and when you have reached your desired torque setting. If thats not enough, these drills are backward compatible so you can use your old batteries and the drills know whether you are using your Lithium-Ion (new) battery or your Nickel (old) batteries. How smart is that? They have even figured out a way to preserve your favorite clutch settings, by providing an independent switch from drilling to driving mode, so you dont have to keep re-setting them. Fully electronic with sensors that disengage the motor when the desired torque setting is reached. They have kept the brushless motor technology for longer run time between servicing of the motor, which is also thermal overload protected. Drill, batteries, and charger carry a three-year warranty. Set comes with T 12 Drill, Lithium Ion Charger, two batteries, Centrotec Starter Set, Fastfix Right-angle chuck, Fastfix Eccentric Chuck, Fastfix Keyless Chuck, Systainer.
Dependable and easy to handle, the Festool T 12+3 Li-Ion Cordless Drill Set makes use of the unique FastFix interchangeable chuck system. Built to sit comfortably in your hand and allow for work in tricky spots, this cordless drill runs on lightweight, long-lived lithium-ion batteries. And with Festool’s advanced MMC electronics, it is easy to set up for application-specific performance.T 12+3 Li-IonCordless Drill SetAt a Glance:Unique FastFix chuck system for five-in-one performanceSophisticated electronic clutch for extended tool lifeConveniently placed clutch, speed, and mode controlsDurable brushless motorIncludes intelligent TRC 3 charger and two lithium-ion batteriesLithium-ion battery has a full three-year warranty. View larger.Multiple chucks for versatility. View larger.Centrotec chuck reduces drill’s weight and footprint. View larger.Use the right-angle chuck to access hard-to-reach places. View larger.Dual Motor Speed Selector. Drill/Drive Mode Selector. Five Tools in One with the FastFix Chuck SystemThe innovative Festool FastFix chuck system allows you to use any of the five Festool specialty chucks with your T 12+3, delivering the versatility that you need to tackle virtually any job, and four of the five chucks are included with this set (the depth-stop chuck is sold separately).The eccentric chuck is designed for working in corners and against adjoining edges, while the right-angle chuck allows you to work at a 90-angle to the drive motor, opening up spaces that used to be impossible to access with a power drill. Both of these chucks swivel a full 360 degrees and feature 16 locking positions for extra versatility.The smaller, lighter Centrotec chuck reduces the T 12+3’s weight and footprint and works with the full array of Festool Centrotec drill and driver bits, while the keyless drill chuck can be used with drill and driver bits up to 1/2-inch in diameter. You can also use standard hex driver bits in the drill with no chuck attached. And, regardless of which chuck you’re working with, you can keep your most-used bits nearby with onboard magnetic storage for up to four 1-inch driver bits.Ergonomic Body for Extended UseThe well-balanced T 12+3 weighs in at just 3 pounds and 1.4 ounces, and offers a soft, rubberized ergonomic grip–a setup that ensures comfortable prolonged use and reduced operator fatigue.Conveniently Placed Direction, Mode, and Speed SelectorsYou can quickly switch between driving and removing screws with the forward/reverse switch, which is conveniently located near the trigger. On the top of the T 12+3, you’ll find the drill/drive-mode selector and the speed selector.When in drill mode, the T 12+3 automatically overrides the clutch to make sure you get maximum power and torque. When in drive mode, the clutch re-engages, and switching between drill and drive modes won’t cause you to lose your clutch setting.The speed selector offers two settings and doesn’t change the torque produced by the motor. When it’s used in conjunction with the clutch setting, you can achieve true application-specific performance.Robust Design with MMC Electronics and Brushless MotorThe T 12+3 features a second-generation brushless motor that’s designed to offer improved efficiency and reliability, as well as a longer service life. This powerful tool offers maximum torque of 300 inch-pounds in steel and maximum torque of 220 inch-pounds in wood to help you power through tough jobs.Its design also includes strategically placed ventilation ports that reduce the chances of premature wear due to overheating, and MMC (multi-material control) electronics, which contribute to greater versatility and durability. A key part of this system is the drill’s sophisticated electronic clutch. Thanks to an audible tone, you’ll always know when the clutch engages. And when the clutch is dialed to a setting below 10, the speed of the drill is also reduced automatically. Compared with mechanical clutches, this design results in less wear on the motor and other parts, and saves you money that would be spent on repairs or replacements.Lithium-Ion Batteries and Battery ChargerThe two Festool T+3 lithium-ion batteries included with this set are cell balanced, which means that battery cells are selected and matched to offer optimal charge and discharge cycles for improved power delivery. These batteries are lighter than other batteries for improved overall handling, and they can be fully charged in just 70 minutes using the included charger, so you don’t lose valuable work time waiting for recharges.The intelligent microprocessor-controlled battery charger uses pulse-charging technology, which is designed to protect your batteries from damage and prolong their life. It features LEDs that let you know when your batteries are ready to go, and it’s compatible with Festool NiCD and NiMH batteries.The Festool T 12+3 Li-Ion Cordless Drill Set is backed by a three-year limited warranty and a 30-day money-back guarantee. The included T+3 batteries are also backed by a three-year warranty.What’s in the BoxFestool T 12+3 Cordless Drill, Centrotec Starter Set, FastFix right angle, eccentric drill chuck, 1/2-inch drill chuck, two lithium-ion batteries, TRC 3 charger, and Systainer storage container.Designed to go where other drill/drivers can’t.